RFQ
ATSC - TAPER REAMER (#10 B&S) ATSC-BSR-10
Part # ATSC-BSR-10
| Manufacturer | AIRCRAFT TOOL AND SUPPLY |
|---|---|
| Schedule B | |
| Shipping Weight | 0.95 lb |
| ECCN | |
| PN Condition |
| Warehouse | US-FL-Fort LauderdaleFTL | US-AZ-PhoenixPHX |
|---|---|---|
| Qty Available | Out of Stock: Request Lead Time | Out of Stock: Request Lead Time |
| Qty |
PN Description
Brown & Sharpe Taper Reamers are used to clean and size tapered holes for the installation of AN385 and AN386 taper pins. Finishing reamer leaves a smooth surface without the need for any addtional honing. Taper diameter from 1.0420" to 1.3370". Brown & Sharp taper reamer. Flute length: 6-7/8". Overall length: 9-3/4". Straight Shank - Straight Flute. TIP: To select the correct reamer for your application, look at the first dash number of the taper pin you are trying to install, and select the same reamer as that number. For example, if you have an AN386-1-8 pin to install, then you would use a #1 reamer.
